Insacal Flow Rig FR 30 enables accurate in-line calibration across a flow range of 5 ... 30,000 kg/h (or equivalent in l/h), making it a flexible solution for small to medium-sized production environments with varying flow requirements.
When to Choose FR-30
- Processes with both low and moderate flow rates
- Production with varying operating conditions
- Need for calibration across multiple flow points
Key Benefits
- Wide usable flow range in one setup
- Consistent accuracy across varying flows
- Reduced need for multiple calibration systems
Flow Range and Measurement Coverage
Each system is configured with one or more flow meters selected to match the required flow range.
A typical flow meter operates with a turndown ratio of approximately 1:20. To ensure accuracy across a wider range, multiple flow meters are combined. This allows reliable calibration from low to high flow within a single system.
Hygienic Design
Our Flow Rigs are used in the biotechnology and pharmaceutical industries and are designed according to hygienic design principles to prevent contamination and ensure reliable measurements. Hygienic design focuses on constructing equipment that can be easily cleaned, inspected, and maintained while minimizing the risk of microbial growth or product residue accumulation.
In our hygienic calibration Flow Rig, all components in contact with the fluid are made from materials suitable for hygienic applications, with smooth surface finishes that reduce the potential for fouling and bacterial attachment. Dead legs, crevices, and sharp corners are avoided because they can trap liquid and residues, which may compromise both hygiene and measurement accuracy.
The geometry of the piping and instrumentation supports complete drainage and prevents stagnant zones.
By incorporating hygienic design principles, our calibration flow rig not only ensures compliance with industry standards but also maintains measurement reliability and reduces downtime associated with cleaning and maintenance. This is especially important when calibrating flow meters used in sanitary processes, where both measurement accuracy and product safety are critical.
Curious if this model fits your process requirements?
Get in touch with our specialists to discuss your application.
| Product specifications - depending on model | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CIP | Yes |
||||||||||||||||||
| Steam Sterilisable (Steam in place) | Yes |
||||||||||||||||||
| ATEX | Yes (Optional) |
||||||||||||||||||
| Flow Range | 5…30,000 kg/h or l/h |
||||||||||||||||||
| Accuracy | 0.25% |
||||||||||||||||||
| Pressure | Up to 5 Bar |
||||||||||||||||||
| Temperature | Up to 40 °C |
||||||||||||||||||
| Ambient Temperature | +10…40 °C |
||||||||||||||||||
| Build Material |
|
||||||||||||||||||
| Surface Roughness | Better than Ra 0,8 |
||||||||||||||||||
| Pipework Connection | Flanges or Tri-Clamps |
||||||||||||||||||
| Data Connection to UUT | mA and Pulse |
||||||||||||||||||
| Power Supply | 400 VAC, 16 A or 32 A |
||||||||||||||||||
| Dimensions (L × W × H) | 1705 x 779 x 1770 mm (Depending on flow range) |
||||||||||||||||||
| Weight | Drained weight approx. 450 kg (Depending on flow range) |
||||||||||||||||||
| NOTE | Specifications refer to standard configurations. |
||||||||||||||||||
Didn't find what you were looking for?
Fill out the contact form and we will get back to you as soon as possible.